|
 |
Flexible Printed Circuits (FPC) is used as interconnection to transmit signals for electronic products by developing circuits on flexible Copper Clad Laminate through processes of exposure, etching.,..etc. FPC is mainly applied to surface mount electronic components and connect PCB & PCB or connect PCB & LCD, to carry out the function of electronic product. |
|
Based upon FPC's characteristics of "thin" and "flexible", there will be a great growth of FPC as the electronic market continues to demand "thinner and thinner" and "smaller and smaller". Relatively, the development of FPC product will help flourish the electronic market as well. |
|
Now our R&D tearn has also been continuously and actively researching the higher-level FPC for more higher-level clients’ demands. We even seek for more economical production cost and more efficient in order to make the whole electric industry reach to the trend of diverse and high-level development |
|
| |
| ‧Note Book Computer |
‧Mobile Phone |
| ‧Digital Camera |
‧LCD Module |
| ‧HDD |
‧CD- ROM |
| ‧Printer |
‧TOUCH PANEL |
| ‧Backlight |
‧Bettery |
| ‧Consumer products |
‧Other electronic products |
|
|
| |
|
|
| Single-side |
| Applied with single side material to make pattern on one side then add the cover layer on the same side |
|
|
| |
|
| Double-side |
| Applied with double sides material to make pattern on both sides then add the cover layer on each side |
|
|
| |
|
| Single-side double access |
| double access Applied with single side material to make pattern but make some window on base film and add the cover layer on pattern top. The final products will have single layer copper but two sides access possibility |
|
|
| |
|
| Multi-layer |
| Binding a single side and a double sides FPC together or binding a double sides and a double sides FPC together. |
|
|
| |
|
| Rigid-flex board |
| Binding flexible and rigid boards structure together in same units as one part |
|
|
| |
Technical Specifications of TECH-WAVE'S FPC |
Number of Layer |
1-4 |
IPC-600-class¢º |
Min.Trace Width/
Spacing |
Single Side |
0.050mm (2 mils) |
IPC-600-class  |
Double Sides |
0.075mm~0.100mm (3~4 mils) |
IPC-600-class |
Min. Hole
Diameter |
Drilling (P.T.H.) |
@Ø 0.2mm |
IPC-600-class |
Punching |
@ Ø0.5mm |
IPC-600-class |
Dimension
Tolerances |
Conductor
Width (W) |
@  0.025mm
(W  0.125mm) |
IPC-600-class |
Hole Diameter (H) |
0.05mm
(With P.T. H. 0.10mm)
(D 1.5mm) |
IPC-600-class |
Outline
Dimension (L) |
0.1mm |
IPC-600-class |
Conductors and Outline (C) |
0.1mm
(Special 0.07mm) |
IPC-600-class |
Finger and Stiffener to Outline |
0.3 ~ 0.5mm |
IPC-600-class |
|
